Tin Snips L Tool for Trimming Sheet-metal Components

Tin Snips – Left Cut

The Tin Snips – Left Cut are practical hand-cutting tools designed for trimming metal roofing panels, flashings and other compatible sheet-metal components.

Unlike powered cutting tools, the snips create a cold cut, helping preserve the protective coating around the cut edge. This makes them particularly suitable for coated metal roofing and cladding products where excessive heat could damage the surface finish.

The snips are available in two cutting-direction options:

• Left-Hand Cut: designed to produce a cut towards the left-hand side.
• Right-Hand Cut: designed to produce a cut towards the right-hand side.

Selecting the appropriate cutting direction helps provide better control when following curved lines, trimming corners and working around detailed roof or flashing profiles. Both versions can also be used for general trimming and controlled straight cuts where suitable.

The compact hand-operated design makes the snips convenient for use during standing-seam roofing, metal tile, box-profile, cladding and flashing installation. No electrical power is required, making them suitable for both workshop preparation and on-site adjustments.

Product Specifications

• Available versions: left-hand cut or right-hand cut
• Approximate dimensions: 25 × 7.5 × 3cm
• Approximate weight: 0.43kg
• Manual cold-cutting tool

Key Features

• Designed for trimming metal panels and flashings
• Produces a cold cut without generating damaging heat
• Helps protect the coating around the trimmed edge
• Available in left-hand and right-hand cutting versions
• Suitable for straight, curved and detailed trimming work
• Compact design for convenient handling and control
• Useful for standing-seam panels, cladding and roofing sheets
• Suitable for workshop and on-site use
• No electrical power required

How to Use

1. Mark the required cutting line clearly on the metal sheet.
2. Select the left-hand or right-hand snips to suit the direction of the cut.
3. Position the sheet securely and insert the metal between the cutting blades.
4. Cut gradually along the marked line using controlled, consistent pressure.
5. Avoid closing the blades completely at the end of each stroke when making long cuts, as this can help reduce edge distortion.

Always wear suitable cut-resistant gloves and eye protection when cutting or handling sheet metal. Freshly cut metal edges may be extremely sharp. Check that the snips are suitable for the material type and thickness before use.