Standard Flashings
OUR PRODUCTS RANGE
Standard Flashing
Ready-made trims and profiles for common roof details. Best option if you need your flashing fast.
Custom Flashing
Made to your exact shapes, widths and measurements. Wide range of material types and colours available to choose from.
Ridge Tiles
Most Common Roofing Finish Elements
Ridge Tile for Standing Seam
Ridge Tile – Box Profile
Ridge for Roof Panels Plus
Ridge Tile for Roof Panels
Color-matched metal ridge cap designed to securely seal the apex of metal roof tile systems, providing reliable weatherproofing and a seamless aesthetic finish.
Apex Standard - For Mono Pitch Roofs
Ridge Tile for ‘Janosik’ Roof Panels
Barge Boards / Verge Flashings
Most Common Roofing Finish Elements
Standard Standing Seam Barge Board
Barge Board – Tile Panels
Profiled Barge Board for Tile Panels
IF YOU HAVEN'T FOUND THE FLASHING YOU WERE LOOKING FOR
PLEASE SEND US A REQUEST FOR A CUSTOM MADE ONE
Made to your exact shapes, widths and measurements. Wide range of material types and colours available to choose from.
Flashing Attachment Boxes
Attachment Box
Height depends on the height of the standing seam. Available in either 2m lengths or matching the Roof Panels (230mm, 310mm, 340mm, 480mm, 500mm).
Eaves Drip Edge
Eaves Drip Edge – Standard for Standing Seam Panels
Eaves Drip Edge / Fascia
Eaves Drip Edge for Janosik & Tysenia Roof Panels
Standard Fascia Flashing
Wall / Roof & Roof / Roof Connections
Flashings for the junctions where a roof plane meets a vertical wall or another roof pitch — the points most exposed to water ingress.
Wall Trough
Wall Abutment
A cover flashing that seals the joint where a roof plane runs into a vertical wall, lapping over the roof panel and turning up the wall face to shed water clear of the junction. Available in 2 m standard lengths in the same colour and coating range as the roof panels, with bespoke angles and leg sizes made to order.
Valley Trough
A V-shaped flashing that sits in the internal angle where two roof pitches meet, carrying the combined run-off from both slopes down to the eaves. Supplied in 2 m standard lengths and colour and coating matched to the roof panels, with custom widths and angles available for shallower or asymmetric valleys.
Wall Cill
A sloped capping flashing that finishes the horizontal transition at a wall — under a window opening or at the head of a lower wall section — throwing water outwards and away from the surface below via a drip edge. Supplied in 2 m standard lengths and matched to the roof panel colour and coating range, with custom projections and pitch angles made to order.
Cladding Corners
Trim profiles that finish the edges, junctions and terminations of a cladding run.
J Channel
Standard Corner
An angled trim that covers the vertical junction where two cladding elevations meet, concealing the panel cut edges and keeping wind-driven water out of the corner joint. Supplied in 2 m standard lengths and matched to the cladding colour and coating range, with custom angles and leg widths available for non-90° corners.
Kick Board
A base trim fitted along the bottom of a cladding run, closing off the cavity behind the panels and kicking rainwater outwards and clear of the wall below. Supplied in 2 m standard lengths and colour and coating matched to the cladding, with custom projections available to suit different batten depths and cavity widths.
Roof Finishing · Standard Range
AVAILABLE SIZES
Our standard flashings are up to 2 metres long
COLOURS
Standard range flashings are vailable in the same range of colours and coatings as the roof panels.
AVAILABLE TYPES
We offer a wide range of roof flashing accessories, including ridge tiles, wind braces, verge trims, snow guards, side fittings, wall flashings, and many more.
READY TO BUY
Ready made products - available to buy now.
Standard Flashings