PVC Gutter – Ø130, RAL, 3m

PVC Half Round Gutter – Ø130, 3 m, RAL 7016 & RAL 9005

This is the gutter itself – the 3 metre run that catches water off the roof and carries it along the eaves to the outlet. The Ø130 half-round profile is the larger of the two common domestic sizes, suited to bigger roof areas and steeper pitches where more water arrives at the eaves during heavy rain than a smaller gutter can take.

Moulded in PVC, the colour runs right through the material rather than sitting on the surface, so a scratch from a ladder or a clip does not expose a different shade underneath. It will not rust or need repainting, and it is light enough to handle and fix single-handed at height – a genuine advantage over steel when you are working off a ladder on your own.

Lengths simply butt together and are joined with a connector, so a run of any length is built up 3 metres at a time. Cut the last piece to suit with a fine-tooth saw.

What this gutter works with

Everything in the Ø130 PVC half-round range is dimensioned to fit together. A complete eaves run generally needs:

• Gutter brackets – fixed to the fascia to carry the run
• Gutter connectors – one at every joint between lengths
• Stop ends – to close the run where it terminates
• 90° internal and external corners – one for each angle in the roof plan
• Gutter outlet – where water leaves the gutter and drops into the downpipe
• Ø90 downpipe, bends and pipe brackets – this gutter is part of the 130/90 system

Browse the full range on our Half Round PVC Gutter page, or see all our gutter systems.

How much do you need?

Measure the full length of each eaves run and divide by 3 to get the number of gutter lengths, rounding up. You will need one connector for every joint, a stop end at each open end, and a corner at each angle in the plan. Send us your measurements and the number of corners and outlets and we will work the quantities out for you.

Colours

Available in RAL 7016 anthracite grey and RAL 9005 jet black, matched across the brackets, connectors, corners and downpipe components in the same range. Other RAL shades can be supplied to order – contact us for availability.

Key features

• Half-round PVC gutter, Ø130 mm, supplied in 3 m lengths
• Part of the 130/90 system – pairs with Ø90 downpipe
• Suited to larger roof areas and steeper pitches
• Colour throughout – no corrosion, no repainting
• Light to handle and easy to cut on site
• Available in RAL 7016 and RAL 9005; other colours to order

Specification