buy it Get a quote
PRODUCT PROPERTIES – DESIGN MEETS FUNCTION
PROPERTIES UNIT ISW30 ISW40 ISW50 ISW60 ISW80 ISW100
CORE THICKNESS (h)* mm 30 40 50 60 80 100
U-VALUE W/m².K 0,55 0,44 0,37 0,29 0,24 0,18
*Attention! Our nominal thickness corresponds to the thickness of the isolation. It is measured at the leanest place of the panel.

MAKE A NON BINDING REQUEST RIGHT NOW

TECHNICAL PROPERTIES
OUTER SHELL LIONTEK® Standing Seam profile 47.200.5
Heat-treated fully galvanised steel, steel thickness 0.50mm
Polyester colour coating (POL) 25μm, other coating systems available
INSULATION CORE CFC- and HCFC-free, density approx. 40kg/m³
Polyurethan hard foam (PUR) or polyisocyanurat hard foam (PIR)
INNER SHELL Optical profile slightly lined (LL), optionally ribbed (GS) or flat (GL)
Heat-treated fully galvanised steel, steel thickness 0.40mm
Polyester coating (POL) 25µm similar to white, other colours and coating systems available
OTHER Foam cut-back, mounting direction from right to left
Large range of standard colours – special colours on request
EXTRAS (on request) Inner shell made from aluminium foil with durable stucco texture (ALF), raw felt board impregnated with special bitumen (BI) or glass fibre reinforced plastic (GFK)

PRODUCT CHARACTERISTICS

The LIONTEK® ISO-System Frequence 47 with PUR insulation core combines optimal thermal insulation with a stylish design. This beautifully shaped panel can be used in residential buildings, in hall construction, in agricultural buildings and wherever special design is important.
The Design “ISO-System Frequence 47” is often used for roof renovations, especially for renovations of corrugated fibre cement panels, in order to preserve the form language of the building. It is the first choice for economical roofing due to its air and water tightness and at the same time high thermal insulation value.
The shape and joint design are optimised for highest stability and best possible water drainage.

Excellent corrosion protection • long service life • several standard colours available • low dead weight • thanks to a lowest possible profile height of 10mm, excellent suitability as door or gate cladding • can be used as wall cladding (substructure with small distances between supports or on planking) • maximum span width 50cm (wall) • can be mounted horizontally or vertically • not suited for roof covering