Steel Fascia Gutter Flat Bracket – Hook Ø135, RAL

Fascia Gutter Bracket – Ø135 Square Steel Gutter, RAL 7016 & RAL 9005

This is the bracket that holds the gutter up. It screws to the face of the fascia board and cradles the Ø135 square steel gutter, carrying the full weight of the run plus whatever the weather puts in it. The profile is pressed to match the gutter section exactly, so the gutter seats properly rather than being held at a point, and that fit is what gives the system its load capacity in heavy rain or under a winter’s snow and ice.

Use it wherever there is a fascia board to fix to – the usual arrangement on a house with eaves. If your roof has no fascia and you need to fix into the rafters instead, the rafter hook is the bracket to choose; ask us and we will point you to the right one for your roof.

What this bracket works with

The fascia bracket is one part of the square steel gutter system, and everything in that range is dimensioned to work together. A typical eaves run needs:

• Square steel gutter – the runs themselves, in Ø135 to match this bracket
• Gutter connectors – one at each joint between gutter lengths
• Stop ends – to close the run where it terminates
• Internal and external corners – one for each angle in the roof plan
• Gutter outlet – where the water leaves the gutter and enters the downpipe
• Downpipe, bends and brackets – to carry the water down the wall to the drain

Browse the full range on our Square Gutter System (Steel) page, or see all our gutter systems.

How many do you need?

As a guide, brackets are spaced at regular centres along the fascia with one close to each side of a joint, corner or outlet, so a 3 m gutter length typically takes three to four brackets. Exposed elevations and long runs want them closer together. If you send us the length of your eaves and the number of corners and outlets, we will work out the quantities for you.

Colours

Available in RAL 7016 anthracite grey and RAL 9005 jet black, matched to the gutter, corners and downpipe components in the same range. Other RAL shades can be supplied to order – contact us for availability.

Key features

• Fixes Ø135 square steel gutter to the fascia board
• Profiled to seat the gutter across its full section
• Designed for high carrying capacity on long and exposed runs
• Colour matched to the rest of the square steel gutter range
• Rafter hooks available for roofs without a fascia board
• Available in RAL 7016 and RAL 9005; other colours to order

Specification

Delivery and collection

Gutter components are sent by standard or express courier, with prices and delivery times shown at checkout. Collection from our Melksham warehouse is available within 24–48 hours – please contact us to arrange a time. Full terms are on our shipping and delivery page.

Not sure which bracket suits your roof, or what else your run needs? Call us on 01249 561049 or message us on WhatsApp and we will go through it with you.